|
Post by jonnhy on Jan 18, 2020 2:29:43 GMT
Hi. Is it possible to turn start/stop off as default, and only turn on if i click the button? VW cc 2014 tdi 140hp, using obdeleven pro.
|
|
|
Post by wackapayne on Jan 23, 2020 11:59:18 GMT
Yes, I have the same model CC
Goto 19 Gateway
Click Adaption
Channel 13 (start/stop activation parameters)
Change to Hex
And enter value 292029
This will change the temperature to prevent Stop Start working. I have had it for the last 5k miles.
BE AWARE THIS WILL DISABLE THE STOP START NO MATTER HOW MANY TIMES YOU PRESS THE BUTTON.
REVERT THE CODE IS - 002000
|
|
|
Post by bartas on Feb 13, 2020 17:56:56 GMT
Hi. Is there any way of coding so once the button is pressed the start/stop is disabled and stays disabled until you press again? I know it's possible on other cars, like BMW. Thanks.
|
|
|
Post by wackapayne on Feb 23, 2020 19:50:23 GMT
Hi. Is there any way of coding so once the button is pressed the start/stop is disabled and stays disabled until you press again? I know it's possible on other cars, like BMW. Thanks. Well actually that's how it's designed but soon as you turn engine off it starts again. So you can either remap the car and remove Stop/Start. Or use the instructions on my previous post to disable.
|
|
|
Post by jonnhy on Nov 4, 2020 23:13:34 GMT
Thanks. But i wish we could have one-click app for this... it woul be so much easier.
|
|