JoeIsuzu
New Member
2013 CC R-line
Posts: 2
|
Post by JoeIsuzu on Oct 18, 2016 15:37:37 GMT
Must have "Conv.turn sig." box checked under "Lights & Vision" settings in MFD. This is the feature that flashes the turn signal a predetermined number of times when changing lanes etc.
- Select Central Electrics (09) - Select Adaptation - Enter 31 for channel and press OK - Default value is typically 3. You can enter 1 through 5 for New Value corresponding to the number of flashes you want. Hit the green check at the bottom to enter code change.
|
|
|
Post by morbidpete on Oct 19, 2018 0:56:19 GMT
Thank you
|
|