|
0.19.0
Feb 24, 2020 18:04:11 GMT
Post by Thirsty on Feb 24, 2020 18:04:11 GMT
Use the following format to report bugs
Description of bug: your bug description Android software version: your android version Phone: your android phone model Dongle variant: Firstgen or Nextgen Car: your vehicle brand, model and year
If you don't use the right format your post will be deleted!
Changelog
v0.19.0
- Improved Device connect dialog to show which devices are available at the time - Improved Offline Live Data loading time - Improved new Apps notifications - Fixed Control Unit connection problem on some vehicles - Fixed UDS Adaptations to write automatically after Security Access required - Fixed to show All Control Units if failed to read from vehicle
|
|
Deleted
Deleted Member
Posts: 0
|
0.19.0
Mar 2, 2020 11:50:17 GMT
Post by Deleted on Mar 2, 2020 11:50:17 GMT
Never tried it before but i tried to scan my Ford Transit Van today and the app just locks up. Is this function still availiable, if so are there any rules we have to follow.
|
|
|
0.19.0
Mar 2, 2020 12:02:01 GMT
Post by Thirsty on Mar 2, 2020 12:02:01 GMT
@testeronline same here. I tried to scan a toyota but after connection to the dongle was established i couldn't do anything. Once i pressed scan or opened the control unit list the app gets unresponsive. I've already reported this directly to the staff.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 2, 2020 12:48:52 GMT
Thirsty Thanks, just a bit of extra info, i did get it to work after the following. Was doing some work on my VAG Car and came up with error 31 function not available (but I had done it before) So I changed the session to Developer Then it let me do the change on my car. Went back to the Ford and as a one off it worked, managed a scan and checked out the details Second time i went back same issue, locked and nothing works. I am coding on my car and just got the 31 error again so will sort out my coding and see if I can scan the van.
Update, no cant get it to work again but what i have proved is that using the next gen dongle i was able to adjust the color of the flashing lights on the dongle. So the issue is very much about talking to the car not the dongle.
|
|
|
0.19.0
Mar 3, 2020 7:31:43 GMT
Post by octo|opto|koppler on Mar 3, 2020 7:31:43 GMT
Thirsty and @testeronline, am I reading Right that you're able to perform Scans on other than VAG cars? What are the results to be expected? Sounds extremely interesting!
|
|
Deleted
Deleted Member
Posts: 0
|
0.19.0
Mar 3, 2020 9:04:15 GMT
via mobile
Post by Deleted on Mar 3, 2020 9:04:15 GMT
Thirsty and @testeronline, am I reading Right that you're able to perform Scans on other than VAG cars? What are the results to be expected? Sounds extremely interesting! yes you can run a scan and it will show errors like on VAG cars my expectation is only generic codes not manufacturer specific ones but as it does not work currently difficult to test. it also does live data
|
|
Deleted
Deleted Member
Posts: 0
|
0.19.0
Mar 3, 2020 17:25:00 GMT
Post by Deleted on Mar 3, 2020 17:25:00 GMT
Quick update on this I managed to get it working again, Using the nextgen device I did a load of coding on my VAG car. Went to the Ford and it worked first time, just pasted a couple pictures so you can see what is available
|
|
Deleted
Deleted Member
Posts: 0
|
0.19.0
Mar 3, 2020 17:33:40 GMT
Post by Deleted on Mar 3, 2020 17:33:40 GMT
Description of bugs
I was doing some testing on changing the MMI Image of the car in the settings menu.
I had previously done this change using long coding [1] Bytes and Bits and it worked fine. I was trying to update the descriptions off the various bits.
On my Spanish forum they gave me many different setups but using the long Coding [0] by changing brand, car class and car generation.
The bug I am reporting is that my firmware seems to support 3 different pictures (3 Door, 5 door and Estate). Using the long coding [0] with the correct settings this works fine and the Byte / Bits are updated correctly. However if I use some other codes i have the change is accepted and fixed on the long coding [0] screen but importantly it does not actually change the settings in the Bits
Android software version: 9 Phone: Sony Xperia Dongle variant: Nextgen Car: Seat Leon Cupra 280 UK 2014 engine code CJXA
|
|
Deleted
Deleted Member
Posts: 0
|
0.19.0
Mar 4, 2020 12:22:06 GMT
Post by Deleted on Mar 4, 2020 12:22:06 GMT
Update on yesterdays bug around changing the MMI Car image.
Thanks to @miceor on the Spanish site I made the change using long coding [0] closed down the app and restarted it and then the long coding [1] is updated with the correct long coding, this should be real time in my view.
Description of bugs
Today whilst doing lots of coding changes to test feedback on updates i got two new red bars on the app
1/ Device not responding - I am taking a break to see if it fixes itself - UPDATE no did not clear I had to do a cache clear to get it back. 2/ Server error not able to communicate with the car - saw this twice.
Android software version: 9 Phone: Sony Xperia Dongle variant: Nextgen Car: Seat Leon Cupra 280 UK 2014 engine code CJXA
|
|
|
Post by MartiniB on Mar 7, 2020 11:08:54 GMT
Android software version: 10 Phone: Samsung Note10+ Dongle variant: Firstgen Car: Škoda Superb 2016 Description of bug: all of emailed *.txt files are translated to local(phone's/Country) latvian while settings are set 'English' for options `Application` and `Database`
|
|
|
Post by necdet93 on Mar 7, 2020 11:39:04 GMT
Hi, Android software version: 8.0.0 Phone: HTC10 Dongle variant: Firstgen Car: Seat Ateca 2017 Description of bug:I found little but important bug. I change my air condition unit STG08 for retrofit Heated Seats. I take backup before and after change the module. Then I check backups on my computer and compared with winmerge. OBDeleven change all part number in prevous backups and other history things.
When I look backup I want to see , This backup contains which module or which FW version. However it not working like this, application always overwriting.
|
|
|
0.19.0
Mar 9, 2020 7:19:53 GMT
Post by MartiniB on Mar 9, 2020 7:19:53 GMT
Android software version: 10 Phone: Samsung Note10+ Dongle variant: Firstgen Car: Škoda Superb 2016 Description of bug: another diffs in History.txt
|
|
f
New Member
Posts: 3
|
0.19.0
Mar 13, 2020 12:01:23 GMT
Post by f on Mar 13, 2020 12:01:23 GMT
Description of bug: cannot connect to new OBD11 Device Android software version: Android 10 / OxygenOs 10.0.4 Phone: OnePlus 7 Pro Dongle variant: Nextgen Pro (red) Car: Seat Leon Cupra ST 4Drive, MY2019
First of all I received a new NextGen Device two days ago. Put the device in OBD car interface, device lights red. Waiting from one to five minutes, cannot connect to it.
I cannot see OBD11 Device in OBDeleven app. I can see OBD11 Device in Android Smartphone => new Bluetooth device, but cannot connect to it, cause it needs a Pin. Pins 0000 or 1234 or 123456 were not accepted. Any idea? Reinstalled app and cleared cache+data already.
Edit: after various restarts and reboots and reinstalling the app, Pin 12346 was accepted. Why does this pin is not listed in the manual?! In the screenshot I am not able to klick on mydevice to connect to it. Ouh man.
|
|
Deleted
Deleted Member
Posts: 0
|
0.19.0
Mar 14, 2020 8:10:54 GMT
f likes this
Post by Deleted on Mar 14, 2020 8:10:54 GMT
Description of bug: cannot connect to new OBD11 Device Android software version: Android 10 / OxygenOs 10.0.4 Phone: OnePlus 7 Pro Dongle variant: Nextgen Pro (red) Car: Seat Leon Cupra ST 4Drive, MY2019
First of all I received a new NextGen Device two days ago. Put the device in OBD car interface, device lights red. Waiting from one to five minutes, cannot connect to it.
I cannot see OBD11 Device in OBDeleven app. I can see OBD11 Device in Android Smartphone => new Bluetooth device, but cannot connect to it, cause it needs a Pin. Pins 0000 or 1234 or 123456 were not accepted. Any idea? Reinstalled app and cleared cache+data already.
Edit: after various restarts and reboots and reinstalling the app, Pin 12346 was accepted. Why does this pin is not listed in the manual?! In the screenshot I am not able to klick on mydevice to connect to it. Ouh man.
you dont pair new device
|
|
|
0.19.0
Mar 17, 2020 7:58:05 GMT
Post by octo|opto|koppler on Mar 17, 2020 7:58:05 GMT
Description of bug: Unable to code gateway list, can't change built-in ECUs (like activate or deactivate OEM radio) Android software version: Android 10 and Android 6 Phone: Huawei Mate 20 and Lenovo Tab2 A10-70F Dongle variant: Firstgen Car: Skoda Fabia 2007, 1.2 60 HP BMM
|
|
|
0.19.0
Mar 17, 2020 8:00:10 GMT
Post by octo|opto|koppler on Mar 17, 2020 8:00:10 GMT
Description of bug: after full scan the complete scan report included much more ECUs than totally installed. 8 ECUs are installed, 21 ECUs where reported Android software version: Android 10 and Android 6
Phone: Huawei Mate 20 and Lenovo Tab2 A10-70F
Dongle variant: Firstgen
Car: VW Sharan MPV 2004, 2.0 115 HP ATM
|
|
tomkasz
Closed beta tester
Posts: 31
|
0.19.0
Mar 19, 2020 10:28:57 GMT
Post by tomkasz on Mar 19, 2020 10:28:57 GMT
Is this type of error an issue on the OBD11 or VW side? What can I do to find out more about the error?
Description of bug: Trouble codes: null - Unknown, Intermittent Android software version: 6.0
Phone: Alcatel 7070X Dongle variant: Firstgen Car: Volkswagen Transporter, T6, 2016
|
|
|
0.19.0
Mar 22, 2020 20:50:39 GMT
Post by maur92 on Mar 22, 2020 20:50:39 GMT
Hi,
If anyone has the same problem below. It's not a bug it's just wrong security code. The right code is 63522, then adaptation is accepted.
In A5 driver assistance in adaptation I can't change anymore:
Directional stabilization assist driver inact deactiv threshold Directional stab. assist.: intensity: steering wheel vibration Directional stab. assist.: intensity: power steering support
When i try to change settings, shows up login window I wrote code 20103 then i click green button, but login window shows again. All other adaptations i can change normally. (1019-10-30 i could change this 3 adaptations normally)
I tried: -disconnect car battery -another phone -another obdeleven device
I think it is a bug, or is it something else?
Android software version: 9 Phone: SM-A505FN Dongle variant: Firstgen Car: ŠKODA OCTAVIA 3 2016
|
|
gokarty
New Member
2017 Jetta SEL NAR
Posts: 6
|
0.19.0
Mar 26, 2020 2:14:58 GMT
Post by gokarty on Mar 26, 2020 2:14:58 GMT
Description of bug: Login Finder Progress lost if you tap anywhere on the screen while login finder is running Android software version: Android 10 Phone: Samsung Galaxy S9 Dongle variant: Nextgen Car: 2017 VW NAR Jetta SEL
Maybe the developers can disable the the touch input for entire screen except the "cancel" button? Yesterday, I had run login finder for 4 hours but when i picked up my phone my palm touched the screen and the popup which shows progress and ETA disappeared and all progress was lost
|
|
|
0.19.0
Apr 22, 2020 9:32:58 GMT
Post by OBDeleven on Apr 22, 2020 9:32:58 GMT
Anyone who is still having any issues, please contact directly Customer Support about it. Thank you.
|
|