|
|
Post by Mj on Oct 25, 2016 13:54:51 GMT
Is there any plans for an application to disable start/stop?
I would be happy to buy this if it was available.
|
|
|
|
Post by gochem on Feb 7, 2017 12:10:36 GMT
Also interested this...
|
|
|
|
Post by srbsq7 on Feb 11, 2017 9:45:47 GMT
|
|
|
|
Post by srbsq7 on Feb 11, 2017 9:47:07 GMT
Essentially using the aircon to prevent stop/start kicking in
|
|
|
|
Post by azz146 on Jul 16, 2017 0:56:47 GMT
Worked for me.
|
|
|
|
Post by Alex39 on Nov 24, 2017 21:25:21 GMT
Hi. I tried to disable the start/stop function through the application. Clicked on the green button, received a message about the successful deactivation. In the history, a new value appeared in the deactivated state. But the srart/stop function never went off, and the credits were not taken off. What could be the problem. Thank you.
|
|
|
|
Post by A4B9 on Dec 11, 2017 14:28:05 GMT
Hello, I also try to disable Start Stop. When I deativate it in the app, a green tick is shown.
But Start Stop is not deativated.
What can I do?
Thank you.
|
|
|
|
Post by A4B9 on Dec 14, 2017 9:58:57 GMT
Hello,
have found this solution on the Internet.
It works
Air Conditioning / Module 08> Adaptation> channel IDE03253 - A / C comfort parameter for start-stop function> old value: 5> new value: 0
|
|
luisp
New Member
Posts: 6 
|
Post by luisp on Dec 26, 2017 17:44:54 GMT
Hi, and how did you get this option: Air Conditioning / Module 08> Adaptation> channel IDE03253 - A / C comfort parameter for start-stop function> old value: 5> new value: 0
I mean, it works using OBD11, what part ??
|
|
|
|
Post by feustiminator on Apr 1, 2019 5:58:58 GMT
Hello, have found this solution on the Internet. It works Air Conditioning / Module 08> Adaptation> channel IDE03253 - A / C comfort parameter for start-stop function> old value: 5> new value: 0 How can i found and change this value? Can anybode make an "step by step"- manual?
|
|
|
|
Post by feustiminator on Apr 2, 2019 4:11:32 GMT
[Deutsch]
Anders herum gefragt,
ich schaffe es, die Start/Stopp zu deaktivieren, aber nach Aus-/ Einschalten der Zündung funktioniert's nicht mehr. Was mache ich falsch?
Wenn man die Anwendung in der App kaufen kann, dann muss es doch auch zu codieren sein...
[English]
I manage to disable the start / stop, but it does not work after turning the ignition off / on. What am I doing wrong?
If you can buy this feature in the obdeleven-app, then it must also be coded manualy...
Feusti
|
|
|
|
Post by feustiminator on Apr 2, 2019 23:49:39 GMT
Ist es dieser Wert, der auf "0" gesetzt werden muss (in Klammern)?
---------------------------------------------------------------
Lange Codierung
Steuergerät: 08 Klima/Heizungselektronik
24180028(5)140000500000100000000000000000000000000000000000000
Kilometerstand: xxxxx km
Datum: 2019-03-20 17:15
---------------------------------------------------------------
|
|
|
|
Post by schumifan on Apr 21, 2019 15:47:39 GMT
Ist es dieser Wert, der auf "0" gesetzt werden muss (in Klammern)? --------------------------------------------------------------- Lange Codierung Steuergerät: 08 Klima/Heizungselektronik 24180028(5)140000500000100000000000000000000000000000000000000 Kilometerstand: xxxxx km Datum: 2019-03-20 17:15 --------------------------------------------------------------- Nein, du musst in die "Anpassung" und dort in "Parameter Klimakomfort für Start-Stopp-Funktion" den Wert von 5 auf 0 setzen. |
|
|
|
Post by feustiminator on May 20, 2019 15:48:35 GMT
Na toll,
und ich bastle mich zu Tode :-D...
Das war genau das, was ich wissen wollte, Danke Schumifan.
Feustiminator
|
|
|
|
Post by datamonk on May 22, 2019 23:20:01 GMT
So I just tried the start/stop disable app on my b9 (2019) S4 with no success. Auto shutoff engaged the very next time I started the engine. Not sure if I did something wrong or the app doesn't work for my car. Just know I wasted 100 credits...Is there anything special aside from turning on the ignition that needs to be done when programming? Trial and error with this whole one time credit model is garbage when the apps may or may not be supported for your vehicle.
|
|
|
|
Post by benvaudi on May 27, 2019 20:20:01 GMT
This is what did last weekend with success on my Audi avant 2019 using Obd11 to disable the start/stop:
Air Conditioning (08) > Adaptation > A/C comfort parameter for start-stop function > (default) 5 > change to new value (0 = disable start/stop)
|
|
|
|
Post by feustiminator on May 28, 2019 17:33:27 GMT
|
|
|
|
Post by verrnum on Sept 5, 2023 18:48:10 GMT
Hi Everybody,
I also would like to definitively disable start/stop.
I have a Audi A4 B9 Avant 2017, there is an App to do it for 100 Credit, but it is mentionned the start/stop will be start again if the A/C is turned OFF...
This is completely useless because I turn off frequently the A/C..
Do you know if there is way to do it permanently , could i follow the procedure above using AC/comfort parameter ?
Thank you
|
|
|
|
Post by verrnum on Sept 6, 2023 10:19:47 GMT
This is what did last weekend with success on my Audi avant 2019 using Obd11 to disable the start/stop: Air Conditioning (08) > Adaptation > A/C comfort parameter for start-stop function > (default) 5 > change to new value (0 = disable start/stop) Hello, Thank you for your help. Do you need also to use the App to disable the stop/start or these instructions are enough ?? Thank you |
|
|
|
Post by DaanA4 on Sept 6, 2023 20:18:43 GMT
Hi Everybody, I also would like to definitively disable start/stop. I have a Audi A4 B9 Avant 2017, there is an App to do it for 100 Credit, but it is mentionned the start/stop will be start again if the A/C is turned OFF... This is completely useless because I turn off frequently the A/C.. Do you know if there is way to do it permanently , could i follow the procedure above using AC/comfort parameter ? Thank you There is no other way, Why would you turn off the airco frequently? The app do the same thing, only set 5 to 0. Don’t spill your credits! |
|
|
|
Post by verrnum on Sept 6, 2023 20:53:57 GMT
Hello,
I don't want to spill my credit it's why I'm trying to understand.
What will happen if I change the value 5 to 0 ? I will be able to disable stop/start until the A/C is turned off ?
Thank you for your help
|
|
|
|
Post by DaanA4 on Sept 7, 2023 8:04:12 GMT
Start stop disabled only with airco on,
When you turn off te airco start stop work like normal.
You can buy small module on aliexpress this module “push de start stop button” so start stop is alway off when you start your engine.
|
|
|
|
Post by verrnum on Sept 7, 2023 19:51:35 GMT
Thank you for the confirmation, I've ordered the module on AliExpress
|
|
(Aircondition)
(Adaption)
(A/C comfort parameter for start-stop function)
(change to new value "0")