darko
New Member
Posts: 4
|
Post by darko on Mar 26, 2020 21:29:24 GMT
Hello All,
My car is EURO VW Golf MK7 TDI Highline 2014. with OEM LED Tail lights (non-facelift LED MK7). Tail lights which I'm trying to install are OEM MK7.5 LED Tails with Dynamic Scroll Blinker. I have purchased USP motorsport Harness adapter (as advised by OBDeleven application for retrofit). Everything has been installed properly according to instructions (MK7.5 LED Tail lights with USP motorsport Harness adapters). After installation, Coding has been done using OBDeleven Application for retrofit "USP MK7.5 Facelift Tail Light" (100 credits). Unfortunately, the final result is not working properly
Final Result: - Daytime Running Lights: not working at all (additional explanation point below) - L+R Blinkers (Dynamic Scroll): not working at all, but they are lighted (illuminated) when Daytime Running Lights are ON (not blinking, not scrolling, they are just constantly illuminated instead of DRLs) - Brake Lights: OK - Reverse Lights: OK - Fog light, (left side only): not working at all
- Park-light (one side only depending of which side turn indicator has been left after switching ignition off): Brake Light + DRL are lighted with high brightness intensity
Do you have any experience with such an issue or do you have any coding solutions to solve this problem and make it working properly?
Thank you All very much for help
|
|
|
Post by vwjap on Mar 26, 2020 22:32:39 GMT
Link to what harness you bought?
|
|
darko
New Member
Posts: 4
|
Post by darko on Mar 27, 2020 7:11:38 GMT
|
|
darko
New Member
Posts: 4
|
Post by darko on Mar 27, 2020 10:54:51 GMT
Hi,
however, the fact is that US market (USP motorsports) doesn't register Golf MK7 earlier than 2015, they consider MK6 for 2014..
Here in Europe MK7 is existing since 2013..
This harness has been installed on my car properly according instructions, very simple with no doubts regarding installation.
Are there any coding solutions to solve this problem and make it working properly?
Thank you All very much for help
|
|
|
Post by vwjap on Mar 27, 2020 11:14:52 GMT
Did you code it in the app as old led bcm?
|
|
|
Post by vwjap on Mar 27, 2020 11:17:45 GMT
Maybe check out this coding?
|
|
darko
New Member
Posts: 4
|
Post by darko on Mar 27, 2020 11:18:35 GMT
Mar 27, 2020 12:14:52 GMT 1 vwjap said: Did you code it in the app as old led bcm?
Hi,
I coded it in app from the old value "original" to the new value "LED" (this is app for USP MK7.5 tails, not DAP MK7.5 tails).
|
|