Motorway lights

[kong]

Hi all

Anyone know how to code motorway lights? i meen this from seat leon instruction manual:
Motorway lights*

The motorway lights are available on vehicles equipped both with full-LED

lights and headlights that switch on automatically.

● They are activated when the light switch is in position AUTO.

● They are deactivated when the light switch is not in position AUTO.

When going above 110 km/h (75 mph) for more than 30 seconds, the dipped

beam raises slightly to increase the distance of visibility of the driver.

When reducing the speed of the car below 100 km/h (60 mph), the dipped

beam returns to its normal position.

I have done codding in Headlights unit and now i need to know where to find i BQM as i cant see tick box in car light setup for this.

Thank you

[mikel]

..

[kong]

I getting error function not available

[kong]

i have checked again unit 55 and find this. If i put codding for highway lights get message coding accepted. Go back and then again for coding and see unit wont accept coding as i getting message coding accepted?

[havsgaard]

How did you manage the coding for motorway lights?



I can find it in module 09, but get the "function not available".



I can also find motorway lights in 55, but I can't find the settings in there, only that it is activated - what to do?

[kong]

I am not able to activate this in unit 55 the coding always go back when i quit the unit to previous setting. And always need to do the basic setting after this. I think this can be done with OBDEleven only VAG PRO and change all PR for unit 55 then should be active setting in unit 09.