|
|
Post by ARi on Jul 7, 2017 10:25:36 GMT
I think we should use this for facelift coding mods, so please only post tested and working mods.
|
|
|
|
Post by ari007 on Jul 9, 2017 22:27:40 GMT
VW Golf MK7 FaceliftAuto Coming Home Lights09 Central Electronics Adaptation Select – Aussenlicht_Uebergreifend Coming Home Verbaustatus - From manual to automatic Comfort Blinker Cycles09 - Central Electronics Adaptation Select – Aussenlicht_BlinkerKomfortblinken Blinkzyklen – From 3 to Your chosen value Note that the acceptable range is 1 to 5 and the default value is 3 *Reset MIB Lighting Setting to Complete Off Road Display 5F - Information Electronics
Long Coding (Text mode) - Byte_24_Navigation_System -> On
Adaptation Select - Car_Function_Adaptations_Gen2- menu_display_compass -> active - menu_display_compass_over_threshold_high -> active Select - Car_Function_List_BAP_Gen2compass_0x15 -> active compass_0x15_msg_bus -> Comfort data bus Reset the MIB unit - Press and hold the ON/OFF button on the infotainment unit for greater than 10 seconds. DRL Option in MIB[09] Central Electronics Adaptation Select – Aussenlicht_FrontTagfahrlicht Aktivierung durch BAP oder Bedienfolge moeglich - Activate Lock/Unlock Sound[09] Central Electronics Select - ACKNOWLEDGEMENT SIGNALS Select ACTIVE for Akustische Rueckmeldung entriegen if you want acoustic feedback for unlock Select YES for Akustische Rueckmeldung verriegeln if you want acoustic feedback for lock Select ACTIVE for Menuesteuerung akustische Rueckmeldung (Acoustic lock menu) In-car procedure: Press the CAR button on the RHS of the infotainment screen Select SETUP on the bottom RHS of the screen (looks like a cog) Select Opening & closing panel Place a tick in Acoustic confirmation box. The facility can be turned ON/OFF via this switch If admins could put this post to top of thread and I will continue to check and add
|
|
|
|
Post by Skyrider on Jul 10, 2017 5:18:25 GMT
Scandinavian DRL
Select Control Unit 09 (Central Electrics)
Security access
Access Code 31347
Adaptations
Select: Aussenlicht_Front
Select: Tagfahrlicht-Dauerfahrlicht aktiviert zusaetzlich Standlicht
Value: Active (orginal inactive)
Comming Home/Leaving Home with DRL and Fog lights
Select Control Unit 09 (Central Electrics)
Security access
Access Code 31347
Adaptations
Select: Aussenlicht_uebergreifend
Select: Coming home leuchten
Value: Fog light (orginal Low Beam)
Blower display in auto operation
Select Control unit 08 (Air condition A/C)
Control unit Long Coding
Blower display in auto operation: Activated (orginal: Not activated)
|
|
|
|
Post by Kamz on Jul 10, 2017 21:07:01 GMT
Any help for coding
Door puddle lights on while folding/unfolding
Change colour of virtual dash - seen this is possible on YouTube
Windows operate via keyfob
Auto rain closing
|
|
|
|
Post by kai0126 on Jul 13, 2017 21:35:06 GMT
I tried enabling the Traffic Sign recognition and had some trouble with it, any Hints for the changes on the Facelift MJ2018 ?
|
|
|
|
Post by Vwjap on Aug 15, 2017 17:42:05 GMT
I tried enabling the Traffic Sign recognition and had some trouble with it, any Hints for the changes on the Facelift MJ2018 ? Colour change in AID Module 17 dash board Adaptation Display depiction Default is 1 Change to 3 Needle sweep in AID Module 17 dash board Long coding Byte 1 Bit 0 select Also done Seat belt warning DLR in infotainment VIM (via app) |
|
|
|
Post by Vwjap on Aug 15, 2017 17:46:33 GMT
Also had a play with the speedo/rev counter faces in the AID
Dashboard
Adaptation
Scroll to the bottom to tube_version
0 default
1-5 different clocks
6-F looked the same as default
|
|
|
|
Post by vwjap on Aug 15, 2017 19:40:41 GMT
Default  1 (blue lines to 30 and 50 now white)  2 (bar thicker through numbers)  3  All the others seem to be the same |
|
|
|
Post by thepictureman on Aug 15, 2017 20:23:45 GMT
just to add to this by default all pictures are shown in thumbnail mode, if you want to make them full size then go to picture in ibb. eg ibb.co/i8WFNF and then select the embed codes option. just copy the BB Code under full image (linked) and you will get the following |
|
|
|
Post by Kamz on Aug 15, 2017 22:38:20 GMT
Any pics of colour change please
|
|
|
|
Post by Tray on Aug 15, 2017 22:46:57 GMT
Default Is there a way to switch off that annoying message about headlight beam mine comes on but doesn't go off unless I switch to beam sometimes lights come on too early and I switch to DRL and message won't come off |
|
|
|
Post by vwjap on Aug 16, 2017 8:52:35 GMT
Any pics of colour change please  |
|
|
|
Post by Kamz on Aug 16, 2017 9:11:52 GMT
Thank you soo much
What is the display in middle, has that changed?
|
|
|
|
Post by Kamz on Aug 16, 2017 9:12:39 GMT
Also does this change the colour on mib unit to match?
|
|
|
|
Post by vwjap on Aug 16, 2017 10:13:46 GMT
Default Is there a way to switch off that annoying message about headlight beam mine comes on but doesn't go off unless I switch to beam sometimes lights come on too early and I switch to DRL and message won't come off can't see anything that sticks out fella, although it may be in central electronics module and that is massive |
|
|
|
Post by vwjap on Aug 16, 2017 10:16:12 GMT
Also does this change the colour on mib unit to match? No just the AID, there is a mod for the mib but it only changes the line below the radio stations to white as far as I can tell, but I normally have music videos playing (plus my mib is still blue) |
|
|
|
Post by vwjap on Aug 16, 2017 10:17:55 GMT
Thank you soo much What is the display in middle, has that changed? That's the driver assist (lane and cruise) I think I noticed the bobbles bouncing when changing the view, which it doesn't do on default |
|
|
|
Post by vwjap on Aug 16, 2017 11:48:06 GMT
Thank you soo much What is the display in middle, has that changed? That's the driver assist (lane and cruise) I think I noticed the bobbles bouncing when changing the view, which it doesn't do on default So can't get into infotainment module do to needing a security code (20103 didn't work, it accepted it but if you try to go into long coding then you get a red box with "something went wrong" or if you go into adaptions you get the red box when trying to get into any of them) so presume it's a code generated of the serial number like needed to activate VIM |
|
|
|
Post by vwjap on Aug 16, 2017 15:07:34 GMT
Bit more playing and was able to get into module 5F, had to clear the app data on the android, so entered 20103 and went into long coding, byte 18 set to 0-10 they change the boot up logo, and yes I had to reboot the unit every single time (press and hold the on/off for 10 seconds
0 welcome to Volkswagen
1 twin drive
2 gtd
3 gti (this actually changes all the blue lines to red)
4 bluemotion
5 egolf
6 R
7 R
8 alltrack
9 gte
10 elegance
also messed about with skins on byte 17, nothing seemed to change tho, but was getting bored with resetting the unit
|
|
|
|
Post by Tray on Aug 16, 2017 17:58:24 GMT
Many thanks for all mods
Does the GTI option change the line in the mib and dash to red?
|
|
|
|
Post by vwjap on Aug 16, 2017 18:03:11 GMT
Many thanks for all mods Does the GTI option change the line in the mib and dash to red? I think the dash is under a separate section as I was playing with the mib settings, but all the blue underlines were changed to red, not a sutle red either 😂 Another confirmed working Amount of fuel used since the last fill up Go into Instruments Long Coding Go to Byte 10 Enable bit 4 BUT in mine there not in gallons there in litres |
|
|
|
Post by Ari on Aug 16, 2017 19:03:04 GMT
Many thanks for all mods Does the GTI option change the line in the mib and dash to red? I think the dash is under a separate section as I was playing with the mib settings, but all the blue underlines were changed to red, not a sutle red either 😂 Another confirmed working Amount of fuel used since the last fill up Go into Instruments Long Coding Go to Byte 10 Enable bit 4 BUT in mine there not in gallons there in litres If you would like gallons, go to setting in mib unit under the field units and change volume measurement from l to gallons |
|
|
|
Post by vwjap on Aug 16, 2017 19:12:50 GMT
If you would like gallons, go to setting in mib unit under the field units and change volume measurement from l to gallons I know but I like mine in litres 😀 |
|
|
|
Post by vwjap on Aug 16, 2017 19:55:30 GMT
Well we'd need a scan of a gti, but I'm wondering if one of the two options that are the same haven't had the gti uploaded, and there specific to just the gti
|
|
|
|
Post by Ari on Aug 16, 2017 20:48:49 GMT
I have found it
dashboard - vehicle variant and set to 2
Changes AID to red
|
|
|
|
Post by vwjap on Aug 16, 2017 21:31:35 GMT
I have found it dashboard - vehicle variant and set to 2 Changes AID to red Bugger was just about to post that plus it's 2 or 3 are both red, and all the rest are blue thats a hour and a half looking around wasted 😂😂 |
|
|
|
Post by Ari on Aug 16, 2017 21:42:55 GMT
Sorry about that but thanks anyway
I have seen a option on some people's AID which has a view of sport/classic which makes the AID like audis where it's just one rev counter with speed display in the centre
I'm sure this can be enabled
|
|
|
|
Post by Curious on Sept 9, 2017 11:23:36 GMT
Isn't the amount since last filled available by default?
|
|
|
|
Post by Alejandro on Sept 12, 2017 5:58:30 GMT
Can I use de apps for my r line 7.5? Are running right?
Thanks
|
|
|
|
Post by vwjap on Sept 12, 2017 8:04:47 GMT
Depends what apps your talking about, there are a couple of codings I've seen that need tweaking to work on the 7.5 and there are some hardware changes that will make sure the tweaks don't work at all, all depends on how quick obd11 writer implement then, TBH it would be better to use coding rather than apps on newer untested cars, that way you can see if it works and if not why it doesn't
Would be nice if they had a bit where you could write your own apps, then they could look into them then add them to their own app list
|
|
