|
|
Post by Blindek on Nov 17, 2017 23:40:40 GMT
After this Coding you lose the ability to set the Ambientlight Intensity! So keep that in mind if you use it or if you want to deactivate Footwell lights
|
|
|
|
Post by vwjap on Nov 18, 2017 19:04:21 GMT
Mine works fine dude, just been and checked it, didn't try all the different areas just the dim and brighten all areas together
|
|
|
|
Post by ari007 on Nov 19, 2017 12:33:26 GMT
Followed instructions and you do lose the ability to adjust light intensity on footwell and door strip lights
Also it only changed the colour on the mib not AID??
|
|
|
|
Post by vwjap on Nov 19, 2017 12:43:06 GMT
What I did
Central electronics
Adaptions
int light. 2nd generation
Instrumententafelbeleuchtung mehrfarbig - active
Interior light, light configuration
Ambientemenue mit alle zonen - active
I then reset the mmi by pressing and holding the on/off button for 10 seconds then went into car/settings then checked the "background lighting" button was in there, pressed it and checked it went on to a picture of the interior of the car, then
Central electronics
Adaptions
Interior light, light configuration
ambient_farbliste_Hmi - active
Then back to central electronics adaptions
Ambientelicht Farbliste
Rotwert Farbe 1:217
Gruenwert Farbe 1:221
Blauwert Farbe 1:235
Rotwert Farbe 2:169
Gruenwert Farbe 2:169
Blauwert Farbe 2:169
Rotwert Farbe 3:253
Gruenwert Farbe 3:108
Blauwert Farbe 3:55
Rotwert Farbe 4:242
Gruenwert Farbe 4:0
Blauwert Farbe 4:40
Rotwert Farbe 5:254
Gruenwert Farbe 5:88
Blauwert Farbe 5:240
Rotwert Farbe 6:124
Gruenwert Farbe 6:63
Blauwert Farbe 6:190
Rotwert Farbe 7:0
Gruenwert Farbe 7:102
Blauwert Farbe 7:255
Rotwert Farbe 8:0
Gruenwert Farbe 8:204
Blauwert Farbe 8:255
Rotwert Farbe 9:0
Gruenwert Farbe 9:204
Blauwert Farbe 9:0
Rotwert Farbe 10:136
Gruenwert Farbe 10:255
Blauwert Farbe 10:57
The I reset the mmi again
Then went into car/settings/background lighting and at the bottom of the screen there's a brightness slider and next to the brightness slider there's a button with 3 interlaced colour circles in it, pressed that and you then get a colour slider, slide that to whatever colour and you'll see the colours change on the mmi and AID screens
|
|
|
|
Post by vwjap on Nov 19, 2017 12:49:08 GMT
Followed instructions and you do lose the ability to adjust light intensity on footwell and door strip lights Also it only changed the colour on the mib not AID?? ok I'll check if I didn't change any other settings cause there's a couple to do with the AID in int light. 2nd generation |
|
|
|
Post by ari007 on Nov 19, 2017 12:53:50 GMT
Followed instructions and you do lose the ability to adjust light intensity on footwell and door strip lights Also it only changed the colour on the mib not AID?? ok I'll check if I didn't change any other settings cause there's a couple to do with the AID in int light. 2nd generation If you could please as mine only changed mib Also have you lost your slider for footwell and door lights? |
|
|
|
Post by vwjap on Nov 19, 2017 13:22:14 GMT
Just checked and yes lost door and footwell independent brightness but you can dim them both together
And under int light. 2nd generation
Instrumententafelbeleuchtung mehrfarbig set to active but I've updated the above post
|
|
|
|
Post by ari007 on Nov 19, 2017 18:09:05 GMT
How do you change brightness together ?
|
|
|
|
Post by vwjap on Nov 19, 2017 18:53:49 GMT
On the background lighting page the slider at the bottom (not the colour one) is the brightness one (sometimes you have to press the all areas button) there's also a off button (set Ambientemenue mit globalem aus -active)
Did you get the AID working then?
|
|
|
|
Post by vwjap on Nov 19, 2017 19:02:22 GMT
This one  |
|
|
|
Post by vwjap on Nov 24, 2017 19:31:55 GMT
Plus you can turn off the footwell lighting using obdeleven
|
|
|
|
Post by ari007 on Dec 1, 2017 16:40:33 GMT
There must be a way to have independent footwell and door with this mod?
|
|
|
|
Post by vwjap on Dec 1, 2017 17:12:49 GMT
Well you can turn them off independently with obdeleven
|
|
|
|
Post by ari007 on Dec 2, 2017 13:41:03 GMT
On the background lighting page the slider at the bottom (not the colour one) is the brightness one (sometimes you have to press the all areas button) there's also a off button (set Ambientemenue mit globalem aus -active) Did you get the AID working then? Yes did it today and got it working I'm pretty sure we can still have independent footwell lighting and door lighting I was thinking something new needs to be enabled as on the background lighting page there is in a section to control all which is both together, Im sure we should be able to activate something which will let us choose which one individually as it says select an area but there is only all to chose from Vwjap you may know more |
|
|
|
Post by vwjap on Dec 2, 2017 14:27:46 GMT
I thought that, but life has got in the way at the mo, it's a shame you can't see the long codings pages without it being plugged in,
Also I'd like to see what the background screen is like on a factory enabled car
|
|
|
|
Post by ari007 on Dec 2, 2017 16:10:49 GMT
I don't believe mk7 will come with this setup from factory
|
|
|
|
Post by alynch30 on Dec 4, 2017 14:19:32 GMT
A few mod does not work on my Canadian FL GTI (without AID)
Scandinavian DRL (Tailight with DRL) does not work on "Auto" (If I put DRL manually the tailight comes one but not on "Auto")
Needle Sweep not working
Mirror dip without memory control
FIS Carbon
Any help would be appreciated
|
|
|
|
Post by vwjap on Dec 4, 2017 15:38:06 GMT
I think the fis carbon only works with a colour display in between the speedo and rev counter, not the black and white one
|
|
|
|
Post by alynch30 on Dec 4, 2017 16:41:24 GMT
I do have the color display so FIS Carbon should be working.. Will try to find the long code as it worked for the needle sweep!
Mirror dip also worked with long coding but since I dont have memory module it will only dip down/up a few clicks - I can't seem to set it exacly how I want it to be.
Now I will do some digging to try to enable tailight with DRL in auto mode. Cant find "Daytime running lights" under Central Electronics - Adaptation so that's probably why the app did not work.
|
|
|
|
Post by vwjap on Dec 4, 2017 20:19:13 GMT
The new modules in the 7.5 have different headings in the adaptions
|
|
|
|
Post by RS1909 on Dec 12, 2017 9:09:36 GMT
Has someone coded laptimer and ESP off? On my leon FR facelift MY 2018 both isn't working. Maybe someone with golf facelift can give me and advise how to get this work.
|
|
|
|
Post by vwjap on Dec 12, 2017 9:48:23 GMT
All I have on the esp is
ESP on Car Menu
Select Control unit 03
Control unit long coding
Byte 29
New Value
05 - the button options are ESC ON/ASR Off/ESC OFF
06 - Button options: ESC ON/ESC SPORT / ESC OFF
09 - Stock
|
|
|
|
Post by RS1909 on Dec 12, 2017 10:06:50 GMT
Is that coding working with the latest golf facelift?
Coding from pre facelift leon for esp wasn't working.
|
|
|
|
Post by RS1909 on Dec 12, 2017 10:07:43 GMT
Same with laptimer and rain closing but rain closing is maybe because of different rain sensor.
|
|
|
|
Post by vwjap on Dec 12, 2017 10:10:07 GMT
Not tried it personally fella, sorry
|
|
|
|
Post by vwjap on Dec 12, 2017 20:39:06 GMT
So I braved the cold and had a little play and got this  Min dash long coding lap timer - yes Then I thought I’d have a look at SOC and looked into “no voltage” and selected display, but got no function, then the tablet crashed, went back in and now there’s no option to change, so guess that’s a swap option |
|
|
|
Post by joebarber27 on Dec 14, 2017 20:22:29 GMT
I'm a pillock, quoted wrong person!! Also had a play with the speedo/rev counter faces in the AID Dashboard Adaptation Scroll to the bottom to tube_(forgot the second word sorry) 0 default 1-5 different clocks 6-F looked the same as default I can't seem to find this option, does anyone have the exact name? |
|
|
|
Post by vwjap on Dec 14, 2017 20:41:24 GMT
Tube_version
|
|
|
|
Post by kaydortmund on Dec 15, 2017 19:32:17 GMT
Default  Is there a way to switch off that annoying message about headlight beam mine comes on but doesn't go off unless I switch to beam sometimes lights come on too early and I switch to DRL and message won't come off Central Electrics (09) Aussenlicht_uebergreifend Fahrlichtwarnung_Hinweis_Konfig Hinweis_in LDS-Stellung_Null_und_SL -> kein Hinweis |
|
|
|
Post by vwjap on Dec 15, 2017 19:56:30 GMT
Well spotted
|
|
