|
|
Post by vwjap on May 25, 2019 7:29:46 GMT
Don he’s asking
Unlock/lock the car and car chirps using “alarm horn”
Alarm goes off because of intruder car makes noise with “car horn”
|
|
fedy
New Member
Posts: 3
|
Post by fedy on May 28, 2019 21:04:37 GMT
Hello
Is anyone did coding for front indicating style
Thanks
|
|
fedy
New Member
Posts: 3
|
Post by fedy on May 28, 2019 22:01:51 GMT
Help please how can I play videos on my Mk7.5 facelift
Is there’s any coding on OBDeleven
|
|
|
|
Post by dv52 (Australia) on May 28, 2019 23:06:57 GMT
Don he’s asking Unlock/lock the car and car chirps using “alarm horn” Alarm goes off because of intruder car makes noise with “car horn” OK. Thanks - my bad. Then isn't the answer to switch the last channel in my picture to "not active" so that the siren (alarm horn) sounds the lock/unlock acknowledgement - or am I still not understanding the question?
Don
|
|
|
|
Post by vwjap on May 29, 2019 7:47:23 GMT
Yep, but he was asking if it was possible to use the different horns for the different activities,
I pointed out there seems to be a horn switch in the alarm section, and we already know the open/close switch 👍
|
|
|
|
Post by alltrack18 on May 31, 2019 18:16:26 GMT
Colleagues, I wanted to share with you the coding that I recently used and they work on 7,5 MY17:
1. Intersection light with route data:
4B multifunction module
Long coddling:
Intersection light with route data, set to enabled
Basic setting & acknowledge of basic setting.
Works with top led lights without Camera on the windshield and navigation discovery media. When the car approaches the intersection or the roundabout, the lights illuminate the curves even when the steering wheel is straight. Sometimes the lights come on when the car is driving slowly around the city.
2. Parking assist switch off speed:
76 Parking assistance
Adaptation
Switch-off speed for parking assist
15 km/h -> 10 km/h
3. Start-Stop traffic jam restart
13 Adaptive cruise control
Adaptation
Expanded restart function
on -> off
The start-stop function will not start your engine if the car in front of you leaves
4. Rear wiper time between wiping
09 Central electronics
Adaptation
Rear Window wiper
Einzelansteuerung heckintervallwischen zeiteintervall 1
8s -> 15s
|
|
|
|
Post by STEPHAN DALLMANN on Jun 2, 2019 1:43:12 GMT
Hi, Do you have a video as an example Intersection light with route data?
|
|
|
|
Post by vwjap on Jun 2, 2019 13:55:05 GMT
I think it’s the lights turn to the map rather than the steering input (if you have bend lighting)
|
|
|
|
Post by alltrack18 on Jun 2, 2019 15:53:44 GMT
I do not have any video. Static lights for cornering receive information from navigation that the car approaches the intersection and they engage regardless of the steering wheel position. That's all.
|
|
|
|
Post by Carolco on Jun 2, 2019 21:20:39 GMT
Statics lights..... hummm.... then it is operational with basic leds?
|
|
|
|
Post by cioce on Jun 3, 2019 10:22:55 GMT
4B multifunction module is present only if you have PXA-B-C leds light.
|
|
|
|
Post by sparklebeard on Jun 3, 2019 22:15:34 GMT
I think it’s the lights turn to the map rather than the steering input (if you have bend lighting) It's the static cornering lights, not the AFS light. If you turn it on, you'll see the side lights illuminate as you approach crossings at city street speeds. It's kind of cool  |
|
|
|
Post by sparklebeard on Jun 3, 2019 22:16:02 GMT
4B multifunction module is present only if you have PXA-B-C leds light. How can you determine which kind of LED lights you have? |
|
|
|
Post by Carolco on Jun 6, 2019 18:08:12 GMT
I have basic leds and have operative the 4B module.....
|
|
|
|
Post by sparklebeard on Jun 7, 2019 1:00:25 GMT
I have basic leds and have operative the 4B module..... Do the basic LEDs have the static cornering lights, though? I believe all LEDs need a 4B module because they require auto-levelling, even basic LEDs. |
|
|
|
Post by cioce on Jun 7, 2019 9:20:03 GMT
4B multifunction module is present only if you have PXA-B-C leds light. How can you determine which kind of LED lights you have? PXA have only one illuminated daytime/blinker "L" (whisker/mustaches), the second on inner sides remain off
PXB have two illuminated "L" and are adaptive with dynamic cornering lights
PXC is like PXB but they have two low beams instead of one
|
|
|
|
Post by simonz82 on Jun 10, 2019 8:09:21 GMT
|
|
|
|
Post by simonz82 on Jun 21, 2019 8:35:26 GMT
Dashboard Theme
|
|
|
|
Post by cabby09 on Jun 22, 2019 14:57:13 GMT
Does anyone know how to code Scandinavian rears without it illuminating all the interior switches and numberplate LEDs as well. The coding that is provided in the early part of the thread does work but then all the interior lights and plate lights are also on in the day.
|
|
|
|
Post by vtecaddict on Jul 2, 2019 7:09:20 GMT
Does anyone know how to code Scandinavian rears without it illuminating all the interior switches and numberplate LEDs as well. The coding that is provided in the early part of the thread does work but then all the interior lights and plate lights are also on in the day. Undo the other coding for Scandinavian rear DRL and try this. 09-Central Electrics Security Access 31347 Adaptation Leuchte16 Lichtfunktion B 16 nicht aktiv => Tagfahrlicht Leuchte17 Lichtfunktion B 17 nicht aktiv => Tagfahrlicht Leuchte23 Lichtfunktion B 23 nicht aktiv => Tagfahrlicht Leuchte24 Lichtfunktion B 24 nicht aktiv => Tagfahrlicht |
|
|
|
Post by vtecaddict on Jul 4, 2019 22:07:23 GMT
Got KESSY door handle to work with ignition on  Enable passive lock and unlock via door handle sensors (KESSY) with ignition onModule B7 - Access Startsystem Interface Text Long Coding
Terminal 15 characteristics of passive entry exit function ORIGINAL VALUE - Function only allowed for terminal 15 off NEW VALUE - Function only allowed for terminal 15 on or off
|
|
|
|
Post by cabby09 on Jul 5, 2019 8:43:04 GMT
Does anyone know how to code Scandinavian rears without it illuminating all the interior switches and numberplate LEDs as well. The coding that is provided in the early part of the thread does work but then all the interior lights and plate lights are also on in the day. Undo the other coding for Scandinavian rear DRL and try this. 09-Central Electrics Security Access 31347 Adaptation Leuchte16 Lichtfunktion B 16 nicht aktiv => Tagfahrlicht Leuchte17 Lichtfunktion B 17 nicht aktiv => Tagfahrlicht Leuchte23 Lichtfunktion B 23 nicht aktiv => Tagfahrlicht Leuchte24 Lichtfunktion B 24 nicht aktiv => Tagfahrlicht I tried this but those modules relate to the indicator lamps at the rear. It's the 7.5 with sweeping indicators |
|
|
|
Post by cioce on Jul 5, 2019 8:58:57 GMT
Module 09 Rear light (Leuchte) for Golf 7.5 with halogen headlights and rear non-dynamic indicator/blinker
Leuchte16BLK SLB35BLK SL KC9 - rear right internal
Leuchte17TFL R BLK BLK SRB3TFL R SR KC3 - rear left internal
Leuchte23SL HLC10 - rear left external
Leuchte24SL HRA65 - rear right external
Module 09 Rear light (Leuchte) for Golf 7.5 with LED headlights and rear dynamic indicator/blinker
Leuchte23SL HLC10 - rear left internal and external
Leuchte24SL HRA65 - rear right internal and external
|
|
|
|
Post by cabby09 on Jul 6, 2019 7:57:09 GMT
Thanks so much!! Works as needed without the interior switch lights on.
Went into Lichtfunktion C23 & C24 and selected Tagfahrlicht then changed the Dimmwert CD23 & CD24 to 127 (Old value 0) |
|
|
|
Post by miguelwhy on Jul 10, 2019 16:14:52 GMT
hello I have a problem when I get into driver assistance settings and pulse the proactive occupant protection option to disable it to activate it does not do anything just throws me a message that says "this function is not available at this time" somebody could help me to be able to have this function again operational? Thank you regards
solved ... the car when in sport mode activates it and can not be deactivated, but the other modes echo, normal, individual if it lets activate and deactivate
I leave here the info in case the same question arises
regards
|
|
|
|
Post by simonz82 on Jul 18, 2019 7:35:34 GMT
|
|
|
|
Post by vtecaddict on Aug 28, 2019 2:49:32 GMT
yes, the key needs to be outside. same as if you were locking or unlocking with the car off.
|
|
|
|
Post by crfan1 on Aug 29, 2019 20:18:22 GMT
Sorry if I missed it in here guys but I have a 2019 R and can somebody list how to remove the safety lock for accessing the setting menus while moving (especially the sound system adjsutments (EQ)? The Video in Motion App does not remove it......or it doesn't work on my 19. This feature drives me nuts.
|
|
2018gti
Full Member
2018 GTI Autobahn 6-speed
Posts: 111
|
Post by 2018gti on Aug 29, 2019 20:29:15 GMT
Hey, go here and you’ll find them: - Module 5F - Infotainment - Adaptations - Go to “Locked menu contents” - Set each entry to not active (FB_*), have fun because there are a lot of them |
|
|
|
Post by crfan1 on Aug 30, 2019 11:56:50 GMT
So I figured it out...went into "Radio" module, adaptations and changed all items listed as blocked (and yes there were a lot of them!!) to unblocked. Worked like a charm! |
|
